The Tohatsu 75 hp TLDI® outboard has exactly what all mariners need on their boat: power without all of the extra weight! Loaded with many of the same features as the 90hp, the 75hp TLDI® is the perfect choice when you need just a little less horsepower.
The 75 hp provides incredible oil and fuel savings (anywhere from 12% to 71% depending on RPM) by utilizing an air-assisted direct fuel injection system to precisely mix air and fuel. This powerful 75 hp TLDI® outboard provides an almost complete burn to reduce emissions while keeping the quality and durability that has become associated with our outboards. Once again, Tohatsu is the ultimate choice in reliability.
Tohatsu 75 hp TLDI® Benefits:
High Performance and Easy Operation:
Fundamentals for User Convenience and Reliability:
Warning & Protection:
The TLDI® series are Tohatsu's award winning outboard motors that have an established reputation for being compact in size while demonstrating highly desired features such as low emissions and high fuel economy that are demanded by the new generation of boaters.
They are powered by a direct fuel injection system and a 32 bit ECU (Engine Control Unit). The ECU gives precise fuel injection instructions in accordance to the operating conditions detected by the multiple sensors located on the motor. The TLDI® outboard motors meets all of the emission regulations stipulated by EPA (Environmental Protection Agency) and CARB (California Air Resources Board).
|3-Step Trolling Speed Control - The idling speed can be set to any of the three rpm ranges, 700, 800 or 900, by adjusting it on your key switch. This feature allows you to select the ideal trolling speed for maneuvering during a variety of current and wind conditions.||
The 32 bit engine control unit controls the fuel injection and ignition timing for TLDI® outboards.
|Fresh Water Flushing Port The 75 hp TLDI® comes standard with a convenient built-in freshwater flush system. Located on the side of the engine, the flushing port simplifies routine engine flushing.||
One of TLDI®'s essential engine components that is the driving force in achieving stabilized fuel injection.
|Direct fuel Injection into Cylinders - Due to the intrinsic design of the chamber on the cylinder head, the finely atomized fuel mist created by the fuel injector is injected near the spark plug to achieve ideal combustion.||
|Multifunctional Tachometer - The tachometer informs the operator of potential problems through the meter indicator and warning lamp. (Remote models only.)|
|Pistons Dedicated to TLDI® Outboards - Teflon coated pistons (equipped on MD 75/90/115) with a concave shape to the head were specifically designed for TLDI® and significantly increase the fuel combustion efficiency.|
* Weight specification is based on the lightest version. Specifications and descriptions are subject to change without notice.
|Engine (No. of Cylinder)||3|
|Output||75hp (56 kw)|
|Displacement||1267 cc (77.3 cu.in)|
|Bore x Stroke||86 x 72.7 mm (3.39 x 2.86 in)|
|Control Type||Remote Control|
|Gear Shift||Forward - Neutral - Reverse|
|Propeller Selection Range||11" - 21"|
|Fuel||Unleaded Gasoline (87 Octane)|
|Oil Type||Premium TCW-3 or Recommended|
|Weight*||337 lbs (153 kg)|
|Alternator Output||12V, 490W, 40A|
|Max. RPM Range||5,150 - 5,850|
|Direct Fuel Injection||S|
|Inductive Ignition System||S|
|Start In Gear Protection||S|
|Thermostat Controlled Cooling System||S|
|Power Trim and Tilt||S|
|Variable Idle Speed||700, 800, 900 rpm|
|Parts Book||Type||Brand||Model||Book Year||Book #|
|Prop Type||Load*||Diameter||Pitch||Blades||Standard Equip.||Part #||Comments|
|aluminum||light||13.2||21||3||9999RUBA321M||Rubex/hub kit required|
|aluminum||light||13.2||19||3||9999RUBA319M||Rubex/hub kit required|
|aluminum||light||13.25||17||3||9999RUBA317M||Rubex/hub kit required|
|aluminum||moderate||13.5||15||3||9999RUBA315M||Rubex/hub kit required|
|aluminum||heavy||13.75||13||3||9999RUBA313M||Rubex/hub kit required|
|aluminum||heavy||14||11||3||9999RUBA311M||Rubex/hub kit required|
|aluminum||heavy||14||9||3||9999RUBA309M||Rubex/hub kit required|
|3C7-87322-1||Water Pump Repair Kit (MD70/75/90/115)|
|3B770-2004M||Fuel line hose (primer bulb assembly & fuel connectors) - will not fit TLDI 75/90C2|
|3FF70-2004M||Fuel line hose (no connectors/fittings; fits all models)|
|3B2-70260-1||8mm (5/16") fuel connector (engine male) - not needed for not needed for TLDI 75/90C2|
|3B270-2501M||8mm (5/16") fuel connector (engine female) - not needed for not needed for TLDI 75/90C2|
|99999-37851||Tohatsu Water/Fuel Separator Kit (includes one filter)|
|99999-37801||Replacement 10 micron filter (for Tohatsu Water/Fuel Separator)|
|99999-UF10K||UNIKAS UF-10K Water/Fuel Separator Kit (includes one filter)|
|99999-UF10RF||Replacement 10 micron filter for Unikas UF-10K (includes replace o-ring)|