Designed specifically for heavier loads, the BFTW 60 hp “Power Thrust” model has a larger gear case and lower gear ratio that is specifically designed to give additional thrust for pontoon boats, work boats and heavier fiberglass boats.
The BFTW 60hp also features Boosted Low Speed Torque to deliver exceptional hole shots and Lean Burn Control for outstanding fuel economy at cruising speeds. The BFTW60 comes standard with a high output 22 amp alternator that produces nearly twice as many charging amps as other competitors. The BFTW 60 hp Power Thrust model delivers everything you need plus more in an outboard.
Tohatsu 60hp 4-Stroke Benefits:
Four Stroke Technology:
Fundamentals for User Convenience and Reliability:
Warning & Protection:
BLAST® System - improves acceleration at low speeds
Boosted Low Speed Torque, or BLAST, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve quickly. This will greatly improve "Hole Shot".
*BLAST® is a registered trademark of Honda Motor Co., Ltd.
ECOmo® - Superior fuel efficiency
ECOmo® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 30% less fuel** than others in its class.
*ECOmo® is a registered trademark of Honda Motor Co., Ltd.
**Based on EPA Specific Fuel Consumption Mode.
Multi-port Programmed Fuel Injection [PGM-FI]® - Powerful Performance
Programmed Fuel Injection delivers the precise amount of fuel/air response with superior fuel efficiency.
4-front Corrosion Protection System
A patented, "Double Sealed" multi-layered paint process, sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
Easy Dock Steering® - Exceptional manuverability
Easy Dock Steering® takes the anxiety out of maneuvering your pontoon boat around the marina. The BFTW60 has a full 50 degrees of steering to port and again to starboard.
* Easy Dock Steering® is a registered trademark of Honda Motor Co., Ltd.
Multi Function Tiller Handle
Ergonomically designed shift lever offers smooth shifting for convenience and comfort. Throttle friction allows fine-tuning of the tiller for safety. Up front shift lever, PTT switch, and engine alert lamps provide added convenience.
|Engine (No. of Cylinder)||SOHC 3 Cylinder/12 Valves|
|Output||60 hp (44.1 kw)|
|Displacement||998 cc (61.0 cu.in.)|
|Bore x Stroke||73 x 80 mm (2.9 x 3.1 in)|
|Control Type||Remote Control|
|Gear Shift||Forward - Neutral - Reverse|
|Ignition System||MicroComputer Programmed|
|Fuel||Unleaded Gasoline (87 Octane or higher)|
|Oil Type||NMMA Certified FC-W® 4-stroke oil** SAE 10W-30/40 (SF, SG, SH, SJ)|
|Oil Capacity||0.7 gal. (2.7L) with filter|
|Weight*||262 lbs. (119 kg)|
|Alternator Output||12V, 240W, 22A|
|Max. RPM Range||5,000 - 6,000|
|Programmed Fuel Injection||S|
|Digital CD Ignition System||S|
|Start In Gear Protection||S|
|Thermostat Controlled Cooling System||S|
|Oil Pressure Warning||S|
|Power Trim and Tilt||S|
|Power Thrust Gear Case||S|
* Weight specification is based on the lightest version.
** FC-W® is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
Specifications and descriptions are subject to change without notice.
|Parts Book||Type||Brand||Model||Book Year||Book #|
|Prop Type||Load*||Diameter||Pitch||Blades||Standard Equip.||Part #||Comments|
|aluminum||light||13.2||21||3||9999RUBA321M||RUBEX / HUB KIT REQUIRED|
|aluminum||light||13.2||19||3||9999RUBA319M||RUBEX / HUB KIT REQUIRED|
|aluminum||light||13.25||17||3||9999RUBA317M||RUBEX / HUB KIT REQUIRED|
|aluminum||moderate||13.5||15||3||9999RUBA315M||RUBEX / HUB KIT REQUIRED|
|aluminum||heavy||13.75||13||3||9999RUBA313M||RUBEX / HUB KIT REQUIRED|
|aluminum||heavy||14||11||3||9999RUBA311M||RUBEX / HUB KIT REQUIRED|
|aluminum||heavy||14||9||3||9999RUBA309M||RUBEX / HUB KIT REQUIRED|